A bronze disc for a listed entity: strong contact, engraved in sacred space
A bronze disc for a listed entity: strong contact, engraved in sacred space
What a listed entity disc is for
This disc is a two-inch cast bronze disc of any listed entity. That wording matters, because it draws a line around what this disc is. It is not a disc for any seal you can imagine, and it is not a disc for a spirit you have invented. It is a disc for an entity that is listed: a spirit with a known seal, a known place in a tradition, and a body of teaching behind it that you can study before you order.
That is a strong claim, and it should be understood in its own terms. Strong contact, here, does not mean a louder experience, or a more dramatic one. It means a steadier, clearer point of contact: a seal you can hold, carry, and work with over time, made for one entity, for one practitioner, rather than a general object that could belong to anyone.
If you are new to spirit work, that steadiness may be exactly what you need, or it may be more than you need. A beginner who has not yet studied an entity, and who orders a disc for strong contact with it, is putting the cart before the horse. Study first. Learn the entity's place, its domain, and the system it belongs to. Then, when you know why you want contact, and what kind of contact you mean, order the disc for that entity.
Engraved in sacred space, with the entity present
That is not a detail to skim past. It describes how the disc is made, and it describes the conditions under which it is made.
Sacred space, in this context, means a space set aside for the work, prepared and held for that purpose, not a workshop bench cleared for an hour between other jobs. Engraving in sacred space means the engraving itself is part of the working, not a separate manufacturing step that happens before the working begins. The disc is not made and then blessed as an afterthought. It is made in the conditions of the work it is meant to serve.
A disc engraved with attention, in sacred space, for one entity, carries that attention in a way a disc engraved without it does not. Whether you experience that difference as a feeling, as a quality in the working, or simply as confidence in the tool, it is a difference in how the object was made, and it is worth knowing about before you order.
That also means the disc is not an instant product. It is made for you, for the entity you choose, in conditions that cannot be rushed without changing what they are. Plan for that. Order when you have time to wait for proper making, not when you need a tool for a working tomorrow night.
Choosing a listed entity
Choosing the entity is the most important decision with this disc, and it should not be made lightly. A listed entity is one whose seal and tradition are already established, so the choice is not about inventing something new. It is about recognising which established working fits the matter in front of you.
Ask yourself, plainly, what the working is for, what spirit or tradition it belongs to, and whether you have studied that spirit or tradition enough to work with it properly. If you cannot answer those questions, you are not ready to choose yet. Read, study, and, if you have a teacher, ask. Let the choice come out of the study, not out of a list of impressive names.
It is also worth asking whether you want a disc for a spirit you work with regularly, or for a spirit you are approaching for a particular matter. A regular working relationship is built over time, and a disc for that spirit becomes a standing tool. A particular matter has a clearer beginning and end, and a disc for that matter should be worked with accordingly. Be clear which one you mean, because the disc will be engraved for one entity, and it should be the entity you actually intend to work with.
If you are torn between two entities, do not order both at once in the hope that one of them will turn out to be right. Choose the one that fits the matter you can state in one clear sentence, and set the other aside for later. A disc engraved for a purpose you later change your mind about is a disc that will sit unused, and an unused tool is a reproach every time you see it.
Bronze, two inches, and a disc made to be handled
Bronze is a practical metal for a working disc. It is solid, it takes engraving well, and it has a weight that reminds you, when you carry it, that you are carrying something. Two inches is a large disc, and that size is part of its character. It is not a small, discreet piece of jewellery. It is a flat disc, meant to be seen and handled, and its size means the engraving can be read clearly.
A disc of this size is made to be handled as well as carried. Hold it in your hands before a working. Place it on an altar, or under a candle, during a working. Put it away properly afterwards, in a clean place used for your working tools, rather than leaving it in a pocket with keys and loose change. A tool that is treated carelessly tends to be worked with carelessly, and that shows in the record you keep afterwards.
Keep the disc in a clean, dry place when you are not using it, away from other metal objects that could scratch it. Clean it gently, with a soft cloth, and do not use harsh chemicals or abrasive cleaners on it. Cast bronze will show wear over time, especially if it is handled often. That wear is normal for a working tool, and it is not a sign that the seal has stopped working. It is a sign that it has been used.
Preparing to work with the disc
Preparation is most of the work, and with a disc engraved for a listed entity, that preparation starts before the disc arrives. Be clear about why you chose this entity, what you are asking for, and what you are prepared to do yourself. If you cannot state the matter in one clear sentence, write it down, leave it overnight, and come back to see if it still reads true.
When the disc arrives, do not start by carrying it everywhere at once. Take time to look at it, to hold it, and to set it aside in a clean place that is used for your working tools. If your practice calls for cleansing or consecration of a new tool, follow the instructions you already follow in your system. A general article like this one is not a substitute for proper teaching in the system, and it should not be used to invent a consecration rite for a disc you have not been taught to consecrate.
Prepare the room and yourself in the same way you would for any spirit working: clear the space, set it aside for this purpose, bathe or wash, change into clothes you do not wear for ordinary errands, and know what you are going to say, in your own words, before you begin. A clear head is a working tool, just as much as a disc, oil, or incense is.
Holding, anointing, fumigating, and showing the disc
There are several ways to work with a disc, and they are not interchangeable. Holding the disc is the simplest: take it in your hands, look at the engraving, and let your attention settle on it before you speak. Putting it under a candle is a way of placing it at the centre of a working, under light, for the duration of the rite. Putting oil on it is anointing: marking the disc for a purpose, deliberately, naming that purpose in your own words.
Carrying the disc is a longer form of working. It means the disc is with you through ordinary days, not only on ritual nights, and that you are carrying the purpose with you in a physical way. Wearing it as a pendant, where the disc is fitted for that use, is a form of carrying, and it should be treated as such: worn when you are working, and put away properly when you are not.
Showing the disc to a desired person, where that is part of your practice and your tradition, is a specific use, and it should be done deliberately, not casually. A disc shown without purpose is just an object being displayed. A disc shown as part of a working is a deliberate act, and it should be prepared for like any other part of the working. Fumigating the disc, by passing it through incense smoke, is the companion practice: to start a working, and for fumigating the tools and talismans that will be used in it. Do that deliberately, too, passing the disc through the smoke with the purpose in mind, rather than waving it through quickly and putting it away.
Do not use a disc as a substitute for the rest of the working. Carrying a disc and then doing nothing else, with no petition, no attention, and no closing, is not spirit work. The disc supports the work, it does not replace it.
A simple working order, to adapt to your own practice
The following is a general order, not a fixed script. Adapt it to the system you already work in. First, prepare the room and yourself, as above. Second, set out the disc, and any oil, incense, or candle you will use. Third, anoint or fumigate the disc, if your practice calls for it, deliberately, naming the purpose in your own words. Fourth, speak your petition, clearly and once, rather than repeating it until it loses its shape. Fifth, sit quietly for a time and listen, rather than filling every moment with more words. Sixth, close the working properly, in whatever way your practice requires, and put the disc away in its proper place.
Afterwards, write down what you did, when you did it, and what you noticed. Not what you hoped would happen, but what actually happened, in plain language. That record is what lets you tell, weeks later, whether anything changed, and whether that change had anything to do with the work. Note the disc itself in that record: when you held it, when you carried it, whether you anointed or fumigated it, and what you noticed on days when you carried it compared with days when you did not.
Keeping a record, and knowing when to stop
Keep a short record for each working: date, purpose in one sentence, disc and any oil or incense used, what you did, and what you noticed afterwards, over days and weeks, not just on the night itself. If nothing changes, that is also information. It may mean the petition was unclear, the timing was wrong, the work was not appropriate, or simply that the situation needs a different approach.
Do not repeat the same working endlessly in the hope that repetition alone will force a result. Do the work properly, once, observe, and then decide, calmly, whether a second working, a different approach, or no further working is the right next step. Repetition without reflection is not persistence. It is noise.
And if the entity you chose no longer fits the work you are doing, say so plainly, and set the disc aside properly, rather than carrying it out of habit. A tool kept for a purpose you no longer have is a tool that confuses the record, and a confused record is hard to learn from.
Two-inch cast bronze disc, for a listed entity of your choice
A disc for strong entity contact should be made for one entity, in sacred space, not pulled from a shelf.
I hand engrave this two-inch cast bronze disc in sacred space, quite often with the entity you wish to have engraved onto your disc present, for strong entity contact with a listed entity you choose. I make no promise about what it will do for you, only that it is engraved by hand, in sacred space, for the entity you choose.
If you want a bronze disc made in this way, this is the one I offer: 2" cast bronze disc listed entity, $324 CAD. View the product
#BronzeDiscListed #StrongContact #ListedEntity #InchCastBronze #Entity #Disc #Spirit #Seal
Products related to this article
Originally published as an article at https://www.enochian.org/blogs/articles/products-2-cast-bronze-disc-listed-entity-html
Β© 2026 Enochian Alchemical Magick, enochian.org. All rights reserved. No part may be copied, reproduced, or reused without permission.