A 2 inch cast copper seal: one disc, your seal, made to be carried
A 2 inch cast copper seal: one disc, your seal, made to be carried
A seal is not a picture of a seal
A seal should be a seal, not a picture of one. That distinction sounds simple, and it is, but it changes how you work with the thing in your hands. A picture can be looked at. A seal can be carried, anointed, fumigated, placed on an altar, and worked with over time. It has weight, it has a surface you can touch, and it stays with you after the working is over, in a way a printed image does not.
That is why the form of a seal matters in traditional Goetia work, and why a seal that is made properly is different from a seal that is merely reproduced. The seal in this article is a 2 inch cast copper seal made into a pendant, for traditional Goetia work, as a hand cast seal. It is made to be carried and worked with, not left in a drawer as decoration, and not filed away as a reference image.
If you are new to this kind of work, it is worth asking yourself, before you order anything, whether you actually want a working tool, or whether you want a picture to look at. Both have their place, but they are not the same thing, and ordering one when you meant the other leads to disappointment that has nothing to do with the quality of the object.
This one does not, and that is the point of it.
Know which talisman or seal you want, know why you want it, and know what working you intend to do with it. Study first, choose second, order third.
It also means this article does not invent a spirit, a use, or a correspondence for this seal. A general seal article that assigned it to one spirit would mislead every buyer who wanted it for another. The uses described here are therefore the general seal uses that apply to any cast seal: holding it, placing it under a candle, putting oil on it, carrying it with you, wearing it as a pendant, and showing it to the desired person, as your practice calls for. The specific spirit, and the specific petition, are yours to supply, from your own study and teaching.
Why copper, and why 2 inches
It takes engraving well, it holds detail on a flat disc, and it has a warmth in the hand that suits a pendant meant to be carried every day. Copper also shows wear honestly. It darkens, it marks, and it takes on the patina of being carried, which is normal for a working tool, and not a sign that the seal has stopped working. It is a sign that it has been carried.
Two inches is a size worth thinking about before you order. It is large enough for engraving to be read clearly, and large enough to hold comfortably in the hand during a working, but it is also large enough to be noticed when worn as a pendant. That is a practical consideration, not a mystical one. If you want a seal that disappears under a shirt, a smaller disc may suit you better.
A hand cast disc shows the hand that made it, in a way a machine cast disc does not, and for a tool that will be held and carried, that difference is felt every time you pick it up.
How a hand cast seal is made
In lost-wax casting, the seal is first worked in wax, then cast in metal from that wax form. The wax is lost in the process, which is where the name comes from, and the metal that remains is a solid, cast object, not a printed shell.
That process also explains why a cast seal is made to order, and why it takes time.
Preparing to work with a seal you chose yourself
Preparation is most of the work, and with a seal you chose yourself, that preparation starts with the choice. Be clear about why you chose this seal, what you are asking for, and what you are prepared to do yourself. If you cannot state the matter in one clear sentence, write it down, leave it overnight, and come back to see if it still reads true.
When the seal arrives, do not start by wearing it everywhere at once. Take time to look at it, to hold it, and to set it aside in a clean place that is used for your working tools. If your practice calls for cleansing or consecration of a new tool, follow the instructions you already follow in your system. A general article like this one is not a substitute for proper teaching in the system, and it should not be used to invent a consecration rite for a seal you have not been taught to consecrate.
Prepare the room and yourself in the same way you would for any Goetia working: clear the space, set it aside for this purpose, bathe or wash, change into clothes you do not wear for ordinary errands, and know what you are going to say, in your own words, before you begin. A clear head is a working tool, just as much as a seal, oil, or incense is.
Carrying, anointing, and fumigating
A pendant seal is made to be carried, and carrying it is part of the work, not an afterthought. Wear it when you are working, and put it away properly when you are not, rather than leaving it in a pocket with keys and loose change, or on a bathroom shelf. A tool that is treated carelessly tends to be worked with carelessly, and that shows in the record you keep afterwards.
Working with a seal, in the general terms given for seal articles, includes holding it, placing it under a candle, putting oil on it, carrying it with you, wearing it as a pendant, and showing it to the desired person, as your practice calls for. Each of those uses is a different way of bringing the seal into the working, and each suits a different kind of petition. Holding it suits a quiet, focused working. Placing it under a candle suits a working that runs over time, with the candle burning above it. Putting oil on it marks it deliberately for a purpose. Carrying it keeps the working present through the day. Wearing it as a pendant does the same, openly, where it can be seen. Showing it to the desired person suits workings where the seal itself is meant to be presented, rather than only carried in private.
Anointing a seal is a way of marking it for a purpose. In practice, that is often done with a matching oil, applied deliberately, naming the purpose in your own words. Fumigating a seal is the companion practice: passing it through incense smoke, to start a working, and for fumigating the tools and talismans that will be used in it. The matching oil or incense, if you use one, is the one for the seal you chose.
Do not use a seal as a substitute for the rest of the working. Carrying a seal and then doing nothing else, with no petition, no attention, and no closing, is not spirit work. The seal supports the work, it does not replace it.
A simple working order, to adapt to your own practice
The following is a general order, not a fixed script. Adapt it to the system you already work in. First, prepare the room and yourself, as above. Second, set out the seal, and any oil, incense, or candle you will use. Third, anoint or fumigate the seal, if your practice calls for it, deliberately, naming the purpose in your own words. Fourth, speak your petition, clearly and once, rather than repeating it until it loses its shape. Fifth, sit quietly for a time and listen, rather than filling every moment with more words. Sixth, close the working properly, in whatever way your practice requires, and put the seal away in its proper place.
Afterwards, write down what you did, when you did it, and what you noticed. Not what you hoped would happen, but what actually happened, in plain language. Note the seal itself in that record: when you wore it, when you put it away, whether you anointed or fumigated it, and what you noticed on days when you carried it compared with days when you did not. That record is what lets you tell, weeks later, whether anything changed, and whether that change had anything to do with the work.
Care for a cast copper pendant
Care for a cast copper pendant is practical, not mystical, and it is worth stating plainly. Copper will darken and mark with wear, especially if it is worn every day, against skin, against clothing, and against other objects. That wear is normal for a working tool. Keep the pendant in a clean, dry place when you are not wearing it, away from other metal objects that could scratch it. Clean it gently, with a soft cloth, and do not use harsh chemicals or abrasive cleaners on it, unless you know, for copper, that such a cleaner is safe.
If the bail loosens, or if the pendant shows damage, stop wearing it until it can be repaired properly. A tool that is falling apart is a distraction in a working, and a safety risk if it can fall off unnoticed. That is a practical point, but it is also a working point: a tool you are worried about losing is a tool you cannot focus with.
Keeping a record, and knowing when to stop
Keep a short record for each working: date, purpose in one sentence, seal and any oil or incense used, what you did, and what you noticed afterwards, over days and weeks, not just on the night itself. If nothing changes, that is also information. It may mean the petition was unclear, the timing was wrong, the work was not appropriate, or simply that the situation needs a different approach.
Do not repeat the same working endlessly in the hope that repetition alone will force a result. Do the work properly, once, observe, and then decide, calmly, whether a second working, a different approach, or no further working is the right next step. Repetition without reflection is not persistence. It is noise.
2 inch cast copper seal
A seal should be a seal, not a picture of one.
I make these as hand cast seals, with my engraving done on a large flat disc, one at a time, and I bless each one myself before it is sent out. This one is a 2 inch cast copper seal made into a pendant, of whichever particular talisman or seal you would like, made for traditional Goetia work, to be carried and worked with, not left in a drawer as decoration. I make no promise about what it will do for you, only that it is cast by hand, for this work.
If you want a copper seal made in this way, this is the one I offer: 2 inch cast copper seal, $216 CAD. View the product
Metal: copper. Form: large flat disc pendant, engraved with the talisman or seal of your choice.
#2InchCast #CastCopperSeal #CopperSeal #CandlePuttingOil #CastSeal #Disc #Seal #TraditionalGoetia #PuttingOil #FlatDisc #Talisman #Goetia