Working with Furfur: a seal made to be carried, not a picture of one

A seal is not a picture of a seal

A seal for Furfur should be a seal, not a picture of one. That distinction sounds simple, and it is, but it changes how you work with the thing in your hands. A picture can be looked at. A seal can be carried, anointed, fumigated, placed on an altar, and worked with over time. It has weight, it has a surface you can touch, and it stays with you after the working is over, in a way a printed image does not.

That is why the form of a seal matters in traditional Goetia work, and why a seal that is made properly is different from a seal that is merely reproduced. The seal in this article is for traditional Goetia work with Furfur, as a hand cast seal, in pendant form, 2 inches. It is made to be carried and worked with, not left in a drawer as decoration, and not filed away as a reference image.

If you are new to this kind of work, it is worth asking yourself, before you order anything, whether you actually want a working tool, or whether you want a picture to look at. Both have their place, but they are not the same thing, and ordering one when you meant the other leads to disappointment that has nothing to do with the quality of the object.

Furfur, and working in the Goetia system

Furfur work, as listed here, is traditional Goetia work with Furfur. That is the specific frame for this article, not generic spirit work in general. If you are working in the Goetia system, work from the instructions and teaching you already follow in that system. A general article like this one is not a substitute for proper teaching, and it should not be used to invent a purpose for a spirit you have not studied.

Before you order anything, be clear about why you are working with Furfur, what you are asking for, and what you are prepared to do yourself. If you cannot state the matter in one clear sentence, write it down, leave it overnight, and come back to see if it still reads true. That pause is part of the work, not a delay in it.

Ask yourself, plainly, whether this is the right working at all, whether the timing is right, and whether there is ordinary-world work that should be done first, or at the same time. Ritual work is not a substitute for dealing with a legal matter, a safety matter, or a medical matter in the ordinary world. If any of those apply, deal with them first.

How a lost-wax cast seal is made

The seals offered here are lost wax cast seals of the Daemon Demons of the various grimoires. They are pure metal which is actually cast, starting with a wax version.

In lost-wax casting, the seal is first worked in wax, then cast in metal from that wax form. The wax is lost in the process, which is where the name comes from, and the metal that remains is a solid, cast object, not a printed shell. You can feel that difference when you hold it: a cast seal has weight, it has a surface that shows the hand work, and it does not have the layered texture of a printed object.

That process also explains why a cast seal is made to order, and why it takes time. A seal that is already listed takes about 2 to 3 weeks while seals that are not listed, but are under the other option, take 8 weeks, because she still has not carved their waxes yet. Furfur is a listed seal, so the shorter timing applies to it in principle.

That is a practical detail, and it is worth knowing before you order, because it affects how the pendant hangs and how it will wear over time.

Preparing to work with a seal

Preparation is most of the work, and with a seal that preparation starts before the seal arrives. Be clear about why you are working with Furfur, and what you are asking for. When the seal arrives, do not start by wearing it everywhere at once. Take time to look at it, to hold it, and to set it aside in a clean place that is used for your working tools. If your practice calls for cleansing or consecration of a new tool, follow the instructions you already follow in your system.

Prepare the room and yourself in the same way you would for any Goetia working: clear the space, set it aside for this purpose, bathe or wash, change into clothes you do not wear for ordinary errands, and know what you are going to say, in your own words, before you begin. A clear head is a working tool, just as much as a seal, oil, or incense is.

Carrying, anointing, and fumigating

A pendant seal is made to be carried, and carrying it is part of the work, not an afterthought. Wear it when you are working, and put it away properly when you are not, rather than leaving it in a pocket with keys and loose change, or on a bathroom shelf. A tool that is treated carelessly tends to be worked with carelessly, and that shows in the record you keep afterwards.

There are several ways to work with a seal, and they are worth knowing separately, because they do different things in a working. Holding the seal in your hand during a working is the simplest: you are keeping the seal present, in contact, while you speak and listen. Putting the seal under a candle during a working is another: the seal sits beneath the light, set aside for the purpose, while the candle burns above it.

Putting oil on the seal is a way of marking it for a purpose. In practice, that is often done with a matching oil, applied deliberately, naming the purpose in your own words. Furfur has a matching oil and a matching incense, both at $44 CAD, for spirit work and spellwork with Furfur, made in small batches when you order. Fumigating the seal is the companion practice: passing it through incense smoke, to start a working, and for fumigating the tools and talismans that will be used in it.

Showing the seal to the desired person, where your practice calls for that, is another recognised way of working with a seal: the seal is presented, deliberately, rather than merely worn and forgotten about. Wearing the seal as a pendant is the form carrying takes here: hung from its bail, against the body, present through the working and through the day, if that is your practice for it.

Do not use a seal as a substitute for the rest of the working. Carrying a seal and then doing nothing else, with no petition, no attention, and no closing, is not spirit work. The seal supports the work, it does not replace it.

A simple working order, to adapt to your own practice

The following is a general order, not a fixed script. Adapt it to the system you already work in. First, prepare the room and yourself, as above. Second, set out the seal, and any oil, incense, or candle you will use. Third, anoint or fumigate the seal, if your practice calls for it, deliberately, naming the purpose in your own words, or place it under the candle for the working. Fourth, speak your petition, clearly and once, rather than repeating it until it loses its shape. Fifth, sit quietly for a time and listen, rather than filling every moment with more words. Sixth, close the working properly, in whatever way your practice requires, and put the seal away in its proper place.

Afterwards, write down what you did, when you did it, and what you noticed. Not what you hoped would happen, but what actually happened, in plain language. That record is what lets you tell, weeks later, whether anything changed, and whether that change had anything to do with the work. Note the seal itself in that record: when you wore it, when you put it away, whether you anointed or fumigated it, and what you noticed on days when you carried it compared with days when you did not.

Care for a cast pendant

Care for a cast metal pendant is practical, not mystical, and it is worth stating plainly. Pure cast metal will show wear over time, especially if it is worn every day, against skin, against clothing, and against other objects. That wear is normal for a working tool, and it is not a sign that the seal has stopped working. It is a sign that it has been carried.

Keep the pendant in a clean, dry place when you are not wearing it, away from other metal objects that could scratch it. Clean it gently, with a soft cloth, and do not use harsh chemicals or abrasive cleaners on it, unless you know, for the specific metal involved, that such a cleaner is safe.

If the bail loosens, or if the pendant shows damage, stop wearing it until it can be repaired properly. A tool that is falling apart is a distraction in a working, and a safety risk if it can fall off unnoticed. That is a practical point, but it is also a working point: a tool you are worried about losing is a tool you cannot focus with.

Keeping a record, and knowing when to stop

Keep a short record for each working: date, purpose in one sentence, seal and any oil or incense used, what you did, and what you noticed afterwards, over days and weeks, not just on the night itself. If nothing changes, that is also information. It may mean the petition was unclear, the timing was wrong, the work was not appropriate, or simply that the situation needs a different approach.

Do not repeat the same working endlessly in the hope that repetition alone will force a result. Do the work properly, once, observe, and then decide, calmly, whether a second working, a different approach, or no further working is the right next step. Repetition without reflection is not persistence. It is noise.

Furfur cast seal pendant, 2 inches

A seal for Furfur should be a seal, not a picture of one.

I make these as lost wax cast seals, cast from a wax version in pure metal, one at a time, and I bless each one myself before it is sent out. This one is Furfur, as a pendant, 2 inches, made for traditional Goetia work with Furfur, to be carried and worked with, not left in a drawer as decoration. I make no promise about what it will do for you, only that it is cast by hand, for this work.

If you want a Furfur seal made in this way, this is the one I offer: Furfur cast Daemon Demon seal pendant, 2 inches, $216 CAD. View the product

Furfur also has a matching oil and a matching incense, each $44 CAD, for anointing and fumigating the seal in the same work.

#SealCarried #Pendant2Inches #LostWaxCast #CastSeal #TraditionalGoetia #MatchingOil #Seal #Daemon #Goetia #Spirit